Basic Information On Menu Control; Setting The Unit Of Measure - Leica RANGEMASTER CRF 1600-B Notice D'utilisation

BaSic infOrmaTiOn On
menu cOnTrOl
For all settings:
- The main menu contains four items - Meters/Yards
display ( ), Ballistic curve (
USEU
( SId ) and Ballistic output format (
individual functions can be found in the relevant
sections.
- Both the main menu and the setting options are set
up as a continuous loop - i.e. all items/settings will be
displayed over and over as you continue pressing the
button.

SeTTing The uniT Of meaSure

The Leica Rangemaster CRF 1600-B can be set to a
metric ( ) or imperial (
EU US
temperature/atmospheric pressure either meters/
Celsius/millibar or yards/Fahrenheit/InHg (Inches of
Mercury). This setting also determines the unit for the
holdover, the ballistic curves and the zeroing range (see
p. 37/36/35).
), Zeroing range
baLL
AbC ). Details of the
) unit system, i.e. for distance/
Setting
1. Press and hold the secondary button (1) (≥3s).
• The display shows
2. Press the main button (2) to select the desired unit of
measure.
= for display in yards
US
= for display in meters
EU
note:
The current setting can always be seen in the display - if
metric values are selected, a dot appears to the bottom
right of the reticule.
3. Save your setting by briefly pressing the secondary
button.
• The saved setting is initially lit continuously as
confirmation, then the display switches to the next
item in the menu (ballistic curve „bALL") and then
disappears if no further settings have been made.
29
(flashing)
USEU