Setting The Unit Of Measure - Leica RANGEMASTER CRF 1000 Notice D'utilisation

SETTING THE UNIT OF MEASURE

The LEICA RANGEMASTER CRF 1000 can be set to
meters or yards, the more commonly used unit in the
USA.
Setting:
1. B riefly press (<3s) the main button (2).
• The target mark appears.
2. P ress and hold (≥3s) the secondary button (1).
• EU.US appears below the target mark.
3. B riefly press the main button.
• EU disappears, the target mark and US continue
to flash.
4. S elect your preferred units of measure by (repeat-
edly) pressing the secondary button. US stands for
the unit yards, EU for meters.
• The respective displays continue to flash.
5. S ave your setting by briefly pressing the main button.
• T he saved setting and the target mark light up
continuously for 2 seconds for confirmation and
then disappear.
Notes:
• T he current setting can always be seen in the
display - if meters are selected, a dot appears
to the bottom right of the target mark.
• C oncerning the setting process: The displays
disappear 3 seconds after you last press one of
the two buttons. The previously saved setting is
retained.
21