Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
troubleshootIng
Problem
cannot get truly round view without
dark edges
Target mark not sharp
displayed when measuring
- - -
Display flashes or no measurement
possible
cause
a) Viewer's pupil is not in ocular's exit
pupil
b) Eyecup position is not correct for
use with / without glasses
Diopter compensation setting is
not perfect
a) Target out of operating range
b) Insufficient reflection from target
Battery flat
28
remedy
a) correct the eye position
b) When wearing glasses, fold down
the eyecup, for viewing without,
it should remain up (see p. 22)
repeat diopter compensation adjustment
(see p. 22)
Note information on measuring range
(see p. 26)
replace battery (see p. 20)
Publicité
Chapitres
Table des Matières
