Maintenance/Cleaning; Important; Spare Parts - Leica PINMASTER Notice D'utilisation

MaIntenance/cleanIng

Your LEIca PINmaSTEr does not require special
care. any large dirt particles, such as sand, should be
removed with a soft brush or be blown off.
Fingerprints etc. on the lens or eyepiece can be can
be cleaned off the lenses by first moistening them
with a damp cloth and then wiping with a soft, clean
chamois leather or lint-free cloth.

Important:

Do not exert excessive pressure when wiping heavily
soiled lens surfaces. although the coating is highly
resistant to abrasion, sand or salt crystals can still
damage it.
The housing should be cleaned only with a damp
leather. Using dry cloths can lead to an electrostatic
build-up. alcohol and other chemical solvents must
not be used to clean the optics or the housing.
as well as its type designation, each LEIca
PINmaSTEr has its "personal" serial number.
make a note of this number in your documents for
security.
attention:
Do not open the main body under any circumstance!

sPare Parts

If you should require any spare parts for your
LEIca PINmaSTEr, e.g. eyepiece cup or carrying
cord, please contact our customer Service depart-
ment (address, see p. 31) or the Leica distributor in
your country (see Warranty card for addresses).
27