Safety Systems And Operating Aids; Overload Protection; Temperature Sensors; Imbalance Sensor - Bosch MCC9555FWC Manuel D'utilisation

SK
5 GHz WLAN (Wi-Fi): For indoor use only.

Safety systems and operating aids

Safety systems and oper-
ating aids
You can find an overview of your ap-
Safety systems and operating aids
pliance's safety systems and operat-
ing aids here.

Overload protection

If your appliance registers overload-
ing, operation will be interrupted by
the overload protection device, e.g.
when processing large quantities.

Temperature sensors

Your appliance has several temperat-
ure sensors.
The infrared temperature sensor in
the main unit measures the temperat-
ure of the food in the pot. If the tem-
perature measured by the infrared
temperature sensor is too high, the
appliance switches off to prevent
deep-frying and cooking in large
volumes of oil.

Imbalance sensor

Your appliance features imbalance
detection. If your appliance detects
an imbalance, the imbalance sensor
will terminate the current operation,
e.g. when chopping excessively large
pieces of food in the pot.

Lid catch

The lid catch ensures that the drive
will only start under certain condi-
tions.
FI SE
Safety systems and operating aids en
UK NO
The drive only starts when the pot
and the lid have been properly inser-
ted and are closed.
→ "Fitting the lid", Page 83

Lid lock

Your appliance is equipped with a lid
lock mechanism. This means you
cannot open the outer lid with seal
under certain conditions of temperat-
ure and speed.
Activation and deactivation of the lid
lock mechanism is indicated by a no-
ticeable clicking sound. When the lid
lock is active, the display shows ⁠ .

Overflow detection

If the touch display comes into con-
tact with liquid, the overflow detection
blocks the display and operation
stops.

Button lock

Lock your appliance so you do not
accidentally switch it on or change
the settings.
Activating button lock
Simultaneously press
▶
3 seconds.
a The keylock has now been activ-
ated.
a The display shows
Tips
¡ You can pause the current process
despite the keylock by pressing
¡ If you are cleaning the main unit,
you can use the keylock for wipe
protection.
CH TR
and
⁠ .
for
⁠ .
105