Ryobi RY803600 Manuel D'utilisation page 20

PERIODIC MAINTENANCE SCHEDULE TABLE
NOTE: If a separate engine manual is provided for this pressure washer, please follow the maintenance schedule provided
in the engine manual for all engine maintenance items instead of the maintenance information listed below.
Maintenance Items
Clean engine & check bolts & nuts
Check engine lubricant
Change engine lubricant
1
Check water inlet filter placement
Add fuel stabilizer
Add pump protector
Clean spark plug
Clean air cleaner
Replace air cleaner element
Clean & adjust spark plug & electrodes
Replace spark plug
Remove carbon from cylinder head
Check & adjust valve clearance
Replace high pressure pump seals
Check pump lubricant level
Check pump lubricant quality (for
discoloration or contamination)
Check for pump lubricant leaks -
inspect oil seals, drain plug, oil plug,
sight glass
Initial lubricant change should be performed after the first 20 hours of operation. Do not pour old lubricant down
1
sewage drains, into garden soil, or into open streams. Your local zoning or environmental regulations will give you
more detailed instruction on proper disposal.
If water inlet filter is missing or damaged, it must be replaced. See Replacement Parts List for part number to order.
2
Have performed by your nearest service center
3
This product has a Five-year Limited Warranty.
For Warranty Details, visit www.ryobitools.com
MAINTENANCE
Each Every
Use 8 hrs.
X
X
X
2
X
X
X
3
3
3
X
X
X
or call (toll free) 1-800-860-4050.
Page 16 — English
Every 20 Every
hrs. 50 hrs.
X
X
X
X
Every Every Every
100 hrs. 150 hrs. 300 hrs.
X
X
X
X
X
X