Weighing; Weigh And Add - SilverCrest IAN 96498 Instructions D'utilisation Et Consignes De Sécurité

– If the units of weight are set to imperial (lb:oz)
then the units of volume will be automatically
shown as fl'oz.
– The standard unit of weight is g.

Weighing

Q
Note: The kitchen scale
0:0.0 lb:oz / if the On / Off / Zero button
17 20
is pressed. If you place the weighing bowl
5
on to the kitchen scale
will also start from 0 g / 0:0.0 lb:oz
If you place the weighing bowl
scale after it has been switched on, then the
2
display will show the weight of the weighing bowl
.
1
Press the On / Off / Zero button
the display to 0 g / 0:0.0 lb:oz
j
P lace the kitchen scale on a solid, flat surface.
j
P ress the On / Off / Zero button
on the kitchen scale
5
j
W ait until the LC display
on 0 g , 0:0.0 lb:oz
17
or 0 ml or 0.0 fl'oz
18
which will be the mode the
kitchen scale was in when
it was last switched off.
j
P ress the mode setting
button to set the kitchen
3
scale to the normal weigh-
ing mode .
23
j
I f necessary select the units
of weight in advance by
pressing the g / lb:oz unit
conversion button
the bottom of the kitchen scale before you start
weighing.
j
W hen you have selected the units of weight press
and hold down the On / Off / Zero button
for 3 seconds to switch off the kitchen scale
96498_silv_Digitale_Kuechenwaage_Content_GB_IE_FI_SE_DK.indd 9
always starts from 0 g /
2
1
before switching on, it
2
/ .
17 20
on the kitchen
1
once to reset
5
/ .
17 20
to switch
5
.
2
stops and stabilizes
4
20
,
19
on
9
5
2
j
S tand the kitchen scale
surface. Place the weighing bowl
weighing platform
j
P ress the On / Off / Zero button
the kitchen scale in the normal weighing mode.
j
W ait until all the segments of the LC display
have illuminated and the kitchen scale has
stabilized at 0 g
17
j
P lace the substance to be weighed into the
weighing bowl
1
The LC display
4
stance in the weighing bowl in the selected unit
of weight.
Note: The kitchen scale works without the weighing
bowl in the same way. Simply follow and repeat
1
the above steps without the weighing bowl

Weigh and add

Q
The kitchen scale allows you to carry out con-
2
secutive weighings without emptying the weighing
bowl between weighings.
1
j
P lace the weighing bowl
platform .
6
j
P ress the On / Off / Zero button
on the kitchen scale
j
W ait until the LC display
es on 0 g , 0:0.0 lb:oz
17
0.0 fl'oz , which will be the mode the kitchen
19
scale was in when it was last switched off.
j
P ress the mode button
weighing mode
23
j
P lace the substance to be weighed into the
weighing bowl
1
The LC display
4
substance placed in the weighing bowl.
j
P ress the On / Off / Zero button
LC display to zero.
4
j
Y ou can add further substances into the weighing
bowl in the same way and pressing the
On / Off / Zero button
substance.
.
Getting started
on a hard, flat table
2
on the
1
.
6
to switch on
5
4
, 0:0.0 lb:oz .
20
to start the weighing process.
shows the weight of the sub-
.
1
on the weighing
1
to switch
5
.
2
stops and stabiliz-
4
or 0 ml or
20 18
to set the scale to
3
(preset to g or lb:oz).
to start the weighing process.
shows the weight of the first
to reset the
5
between each new
5
GB/IE
19.11.13 08:21
9