Operation; Weighing Items; Adding Further Items (Tare); Displaying Nutritional And Energy Values - SilverCrest SNAW 1000 D2 Mode D'emploi

Operation

Weighing items

1) Press the ON/OFF button 9 to switch on the scales.
The start display appears briefly, then "0 g" is shown automatically.
2) If you wish to weigh food without a container, place the food on the weighing
platform 1. The weight is displayed.
If you wish to weigh the food in a bowl/container, first place the empty
bowl/container on the weighing platform 1. Press the TARE 7 button. The
display 3 shows "0 g" q and "T" z appears on the display 3. Place the
food in the bowl/container. The weight of the food is displayed.

Adding further items (tare)

To weigh several different substances (e.g. various ingredients for a dough)
in combination, you can set the scales to 0 each time before adding a further
substance.
■ If you wish to reset the scales to "0 g" after the first measurement in order to
measure the next ingredient, press the TARE button 7. The display 3 shows
"0 g" q and "T" z appears on the display 3.

Displaying nutritional and energy values

1) Place the food on the weighing platform 1.
2) Look up the appropriate code for the food to be weighed from the food list
provided at the end of these instructions.
3) Enter the 3-digit code using the number buttons 4, e.g. 024. All nutritional
and energy values of the respective food appear on the nutritional/energy
value displays e.
KCAL:
KJ:
FAT:
CARB:
PROT:
CHOL:
BE:
SNAW 1000 D2
CAUTION
Excess or incorrect loads will cause irreparable damage to
the appliance.
► Never place food weighing more than 5 kg (11 lb) on the weighing
plate . In cases of doubt, first weigh heavy food using more sturdy
scales.
► Do not place any objects or food on the display
kilocalories
kilojoules
fat
carbohydrates
protein
cholesterol
bread units
or the buttons.
GB │ IE │
9 ■