Technical Data; Residual Risk; English - Milwaukee M12 BPRT Notice Originale

TECHNICAL DATA

RIVET TOOL
Production code
Battery voltage
Jaw diameter max.
Tool stroke length
Pull force
Rivet size Ø
Black
Brown
Red
Green
Rivet material
Weight according EPTA-Procedure 01/2003
(Li-Ion 2,0 Ah)
Recommended Ambient Operating
Temperature
Recommended battery types
Recommended charger
Noise information
Measured values determined according to EN 62841. Typically, the
A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 53,1 dB(A)
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according
to EN 62841
Vibration emission valuea
h
Uncertainty K=
WARNING!
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for di erent
applications, with di erent accessories or poorly maintained, the
vibration emission may di er. This may signi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signi cantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the e ects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.
WARNING Read all safety warnings, instructions,
illustrations and speci cations provided with this power
tool. Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
M12 BPRT
RIVET TOOL SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces only,
4670 73 01...
when performing an operation where the cutting accessory
... 000001-999999
may contact hidden wiring. Cutting accessory contacting a
12 V
"live" wire may make exposed metal parts of the power tool "live"
4,8 mm
and could give the operator an electric shock.
20,3 mm
Use protective equipment. The use of protective clothing is
9000 N
recommended, such as dust mask, protective gloves, sturdy non-
slip footwear, helmet and ear defenders.
Have damage repared immediately by an authorised workshop.
4,8 mm
4,0 mm
Remove the battery pack before starting any work on the
3,2 mm
appliance.
2,4 mm
To avoid injury and damage, never immerse the tool, removable
Aluminium
battery or charger in liquid or allow liquid to penetrate them.
Copper
Use only System M12 chargers for charging System M12 battery
Steel
packs. Do not use battery packs from other systems.
Stainless steel
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
2,1 kg
To reduce the risk of re, personal injury, and product damage due
-18°C ... +50°C
to a short circuit, never immerse your tool, battery pack or charger
in uid or al-low a uid to ow inside them. Corrosive or conductive
M12B...
uids, such as seawater, certain industrial chemicals, and bleach or
C12C
bleach containing products, etc., Can cause a short circuit.
M12C4
M12-18 ...
SPECIFIED CONDITIONS OF USE
This blind riveting power tool is designed for professional blind
rivet setting applications.

RESIDUAL RISK

64,1 dB(A)
In spite of the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks cannot be
avoided. These are:
• Impairment of hearing.
0,1 m/s
2
• Risk of personal injury due ying particles
1,5 m/s
2
MAINTENANCE
Remove the battery pack before starting any work on the
appliance.
To avoid injury and damage, never immerse the tool, removable
battery or charger in liquid or allow liquid to penetrate them.
The ventilation slots of the machine must be kept clear at all times.
Service and repair work may only be carried out by authorised
specialist workshops.
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the Article No. as well as the machine type printed on the
label and order the drawing at your local service agents or directly
at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Win-
nenden, Germany.
GB

English

13