Additional Functions; Hold Function; Max-Min" Measured Value Display; Display Illumination - VOLTCRAFT UM 5/1 100 Mode D'emploi

12. ADDITIONAL FUNCTIONS

The following additional functions can be activated and deactivated at any time during measurement.
a) HOLD Function
To record the measured value briefly, push the button "HOLD". The display shows the active Hold function with the
icon "HOLD". Pushing the button again switches the function off again. When the Hold function is active, all buttons
(except for display lighting, HOLD and operating button) are locked.
b) "MAX-MIN" measured value display
The meter shows the maximum measured value of the current measuring series in "MAX" mode and the lowest one
in "MIN" mode. To switch the functions on and off, push the button "MAX/MIN" repeatedly until the desired function is
displayed. When the function is active, the display shows "MAX" or "MIN". To switch the function off again, push the
button again. The display "MAX/MIN" goes out.
c) Display illumination
The display can be lighted in low light using the light button. Pushing the button again switches the lighting off again.
The lighting remains on for up to 30 seconds and then switches off again automatically.
34