EINHELL AGILLO Traduction Du Mode D'emploi D'origine page 14

machine and when it is not being used.
•
Acquaint yourself with the controls and how to
use the equipment.
•
Stop using the equipment when there are
people – particularly children – or pets nearby.
•
Never use the machine if protective
equipment is damaged or missing.
•
Never mount metal cutting elements. Never
replace the non-metal cutting unit with a
metal cutting unit.
If it is used for a lengthy period, the vibrations
it causes in the hands of the user may result
in circulation problems (hand-arm vibration
syndrome).
White fi nger syndrome is a vascular disease that
involves seizure-like spasms of the fi ngers and
toes. The aff ected areas are no longer suffi ciently
supplied with blood and therefore appear
extremely pale.
The frequent use of vibrating equipment may
trigger nerve damage in people with an impaired
circulation (for example smokers, diabetics).
Should you observe any unusual impairments,
interrupt your work immediately and consult a
doctor.
Follow these instructions in order to reduce the
dangers:
•
Keep your body and in particular your hands
warm when working in the cold.
•
Take regular breaks and move your hands
to stimulate the blood circulation during the
breaks.
•
Ensure that the equipment makes the
least possible vibration through regular
maintenance and solid parts on the
equipment.
Safety precautions for handling the blade
•
Take not of all warnings and instructions
relating to operating and fitting the blade.
•
The blade can recoil suddenly from objects
if it cannot cut or mow through them. This
can cause injuries to the arms or legs. Keep
bystanders and animals at least 15 meters
away from where you are working. If the
equipment strikes a foreign body, stop the
engine immediately and wait for the blade
to come to a standstill. Check the blade for
signs of damage. Always replace the blade if
it is bent or cracked.
•
The blade is liable to catapult away objects
with high force. This can cause blindness or
injuries. Wear protection that complies with
Anl_Agillo_SPK7_USA.indb 14 Anl_Agillo_SPK7_USA.indb 14
EN
ANSI Z87.1, face and legs. Always remove
objects from your working area before you
use the blade.
•
Carefully check your machine and its fittings
for signs of damage every time before use.
Do not use the equipment unless all the blade
fittings are installed correctly.
•
When you release the throttle lever, the blade
will continue to rotate and will only gradually
come to a standstill. A blade which is in the
process of rotating to a standstill can cause
you or bystanders injuries through cutting.
Before you start any work on the blade, switch
off the engine and ensure that the blade has
come to a standstill.
•
The danger zone has a radius of 50 ft. (15 m).
Bystanders may suffer blindness or injuries.
Keep a distance of 50 ft. (15 m) between
yourself and other people or animals.
Important: The cutting unit continues to run
for a few seconds after the motor is switched
off .
The cutter continues to rotate!
Keep this safety information in a safe place.
Explanation of the warning signs on the
equipment (Fig. 26):
1. Warning!
2. Read the directions for use before operating
the equipment.
3. Wear protective headgear, goggles and ear
muff s.
4. Wear sturdy, non-slip footwear.
5. Wear safety gloves.
6. Protect the equipment from rain and damp.
7. Be careful of objects being thrown out!
8. All bystanders must be kept at least 50 ft. (15
m) from the machine.
9. The equipment continues to rotate!
10. Beware of blade thurst!
11. Do not use any saw blades.
- 14 -
05.08.2019 10:37:30 05.08.2019 10:37:30