EINHELL TC-PG 1000 Instructions D'origine page 20

9. Troubleshooting
Fault
Engine does not
start
Generator has too
little or no
voltage
Anl_TC_PG_1000_SPK1.indb 20 Anl_TC_PG_1000_SPK1.indb 20
GB
Mögliche Ursache
Automatic oil cut-out has not
responded
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air fi lter dirty
- 20 -
Behebung
Check the oil level, top up with engine
oil
Refuel
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the fi lter
07.12.2016 08:43:31 07.12.2016 08:43:31