Activating The Control Panel; Additional Output Control Panel Pro D (Optional) - Harvia SENTIO Professional D Série Instructions D'installation Et Mode D'emploi

Instructions for use for the user

10.3. Activating the control panel

The control unit can be started with the last used settings for temperature, humid-
ity* and light or with the standard settings.
● For activation with the last used settings, press the On/Off button A for one
second.
► The control panel is activated.
► The symbol 5 lights up. The last used settings for temperature, humid-
ity* and light are active.
● For activation with the standard settings, press the On/Off button A for about
3 seconds.
► The control panel is activated.
► The symbol 5 lights up. The standard settings for temperature (90 °C),
humidity* (off) and light (50%) are active.
* The humidity function is only available on the Pro D3/Pro D3i models.

10.4. Additional output control panel Pro D (optional)

If the control unit has been activated as described in 10.3. Activating the control
panel, for the Pro D2i and Pro D3i models the function 7 (additional output)
can also be activated with "Additional output control panel Pro D".
● Press the On/Off button A of the additional output control panel for one second.
► The additional output function is active.
► The display shows the set intensity.
a
p. 49/70
EN