Harvia SENTIO Professional D Série Instructions D'installation Et Mode D'emploi page 41

Installation instructions, for professionals only
Setting the fan operating mode
The fan can either be modulated or switched on and off. The dimmer switch
function for the fan is activated as standard. If you wish to deactivate the dimmer
switch function for the fan, perform the following steps:
1. Open the technician menu (see page 38).
2. Select "FAn" by pressing mode button D.
3. Press the On/Off button A.
4. Select the desired setting using the plus button B and the minus button C.
● "on" means that the fan is dimmable (standard)
● "oFF" means that the fan is switchable
5. Confirm the selection by pressing the On/Off button A.
6. Make other settings or leave the technician menu by pressing the On/Off
button A for about 3 seconds.
7. Then switch the power unit off for about 10 seconds.
Setting operating mode of the additional output (only Pro D2i/Pro D3i)
The additional output can either be modulated or switched on and off. The dim-
mer switch function is activated as standard. If you wish to deactivate the dimmer
switch function for the additional output, perform the following steps:
1. Open the technician menu (see page 38).
2. Select "IdS" by pressing the mode button D.
3. Press the On/Off button A.
4. Select the desired value with the plus button B and the minus button C.
● "on" means that the additional output is dimmable / Temperature adjustable
(standard; max. 500 W - see „Id" page 43))
● "oFF" means that the additional output is switchable (max. 3.5 kW)
5. Confirm the selection by pressing the On/Off button A.
6. Make other settings or leave the technician menu by pressing the On/Off
button A for about 3 seconds.
7. Then switch the power unit off for about 10 seconds.
p. 41/70
EN