Foot Pedal - RIDGID 1600RV0 Manuel Du Propriétaire

SP6940-1 1600RV0_1_SP6940-1 1/22/15 2:28 PM Page 12
Operation (Continued)
Note that the ALCI is a protective device
that may make the Vac temporarily
inoperable under some abnormal
conditions such as immersing the base of
the Vac in water. Before any use of the
Vac involving wet pickup, or if the base
has previously been placed in standing
water or on a wet floor, the ALCI should
be tested as follows:
1. With the ALCI plugged in, press the
test button.
2. The reset button will pop up. If not,
do not use appliance.
3. Press reset button to restore power.
PUSH DOWN
TO TURN "ON"
AND "OFF"
ON/OFF

Foot Pedal

WARNING: Electric shock hazard
- do not place and operate vacuum
in standing water.
Familiarize yourself with the accessories
included with the Vac. Each accessory may
be used in various ways for vacuuming
and blowing debris. Here is a list of the
accessories and their uses.
1-7/8" Multi-Nozzle Body - Holds floor
inserts for specialized cleaning
applications: Floor Brush, Squeegee, and
Carpet Inserts. To change inserts, slide red
tabs to the "open" position and pull insert
from the center. Install new insert flush with
nozzle body and slide tabs to the "lock"
position.
1-7/8" Floor Brush Insert - Used for large
area clean-ups on smooth surfaces.
Wet Nozzle / 1-7/8" Squeegee Insert -
Used for wet pickup on smooth surfaces to
pick up liquid and dry the surface in one
stroke.
1-7/8" Carpet Insert - Dry and wet pickup
nozzle for most upholstery and carpet
cleaning.
1-7/8" Claw Nozzle - Use to pick up debris
in hard to reach locations.
TEST
1-7/8" Dusting Brush - Used for detailed
RESET
cleaning in small spaces.
ALCI
Crevice Tool - Use to pick up debris in
Plug
hard to reach locations.
Utility Nozzle - General purpose nozzle
for most vacuuming applications.
Car Nozzle - Dry pickup nozzle for car
interiors and most upholstery cleaning.
Muffler/Diffuser - Use to disperse
exhaust air stream while reducing noise.
Insert into blowing port.
Extension Wands - These wands can be
connected together and provides additional
length for more reach.
Hose - Provides transfer of vacuum or
blowing capability to work site. Provides
the means of attaching extension wands
and nozzles.
12