Disposal; Trouble-Shooting - SilverCrest SBSS 750 B2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
• If the vacuum cleaner is in the normal
suction position, hook the nozzle into
the holder 18 at the rear end.
• Or you can raise the vacuum cleaner
upright and hook the nozzle on the un-
derside.
• For space-saving storage and to ensure
the vacuum is standing in a stable posi-
tion, push the telescopic tube 9 together
as far as possible.
Removing the hose
• To remove the hose 1 press the two re-
lease buttons 6 and pull out.

12. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances.
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

13. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Fault
Possible causes/Action
No
• Check the power supply.
function
• Have all parts been properly
connected?
• Is the dust bag indicator 2
filled?
- Is one of the nozzles, the
hose 1 or the telescopic
Suction
tube 9 clogged?
power in-
- Is the dust bag full?
sufficient
- Is one or several filters
heavily contaminated?
• Is the auxiliary air valve 11
open?
• Is the suction power set too
low on the control dial 22?
• It is normal for new devices
to have some odour devel-
opment, this is not harmful
Odour
to health.
develop-
• If a musty smell occurs later,
ment
check the dust bag and fil-
ters. Change them if neces-
sary.
31
GB

Publicité

Table des Matières
loading

Table des Matières