Assembling The Vacuum Cleaner - SilverCrest SBSS 750 B2 Mode D'emploi

6. Assembling the
vacuum cleaner
DANGER! Risk of injury!
Unplug the mains plug 20 before as-
sembling or disassembling the vacuum
cleaner.
Inserting the hose
6
4
• Insert the hose 1 into the connection
opening 4 on the top of the device.
- The two release buttons 6 must be on
the sides.
- The hose 1 must engage audibly.
• To remove the hose 1 press the two re-
lease buttons 6 and pull out.
Attaching the telescopic tube
• Insert the hose 1 with the handle 12
into the upper end of the telescopic
tube 9. For a better grip, turn the han-
dle slightly back and forth.
6
Attaching/removing the nozzle
• All nozzles can be attached directly to
the handle 12 of the hose 1 as well as
to the lower end of the telescopic
tube 9.
• Plug in the desired nozzle. Turn the noz-
zle slightly back and forth for a better
grip.
• To remove, gently turn the nozzle back
and forth and pull it.
Adjusting the length of the tele-
scopic tube
10
1. Push down the slider 10 on the tele-
scopic tube 9 and set the desired
length.
2. Release the slider 10 and continue to
move the telescopic tube 9 until it clicks
into place.
25
GB