Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Notes
• When mounting on the dashboard, remove the
visor clip carefully from the microphone , then
attach the flat-mount base to the microphone
.
• Before attaching the double-sided tape clean
the surface of the dashboard with a dry cloth.
Using the wired remote control
1
To enable the wired remote control,
set [STRG CONTROL] in [STEERING] to
[PRESET].
Installation
Removing the trim ring and the
mounting sleeve
Before installing the unit, remove the trim
ring and the mounting sleeve from the
unit.
1
Pinch both edges of the trim ring ,
then pull it out.
2
Insert both release keys until they
click, and pull down the mounting
sleeve , then pull up the unit to
separate.
Face the hook inwards.
16
GB
Mounting the unit in the
dashboard
Before installing, make sure the catches on
both sides of the mounting sleeve are
bent inwards 2 mm (
CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The
heatsink on the left side of the unit
remains hot right after use.
1
Position the mounting sleeve
inside the dashboard, then bend the
claws outward for a tight fit.
53 mm (2
2
Mount the unit onto the mounting
sleeve , then attach the trim ring
.
Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the trim ring are
properly engaged in the slots of the unit.
3
/
in).
32
182 mm (7
1
/
4
1
/
in)
8
Catch
in)
Publicité
Table des Matières
