Fuse Replacement; Detaching And Attaching The Front Panel - Sony DSX-A202UI Mode D'emploi

Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket  are bent inwards 2 mm (
in).
1
Position the bracket  inside the
dashboard, then bend the claws outward
for a tight fit.

2
Mount the unit onto the bracket , then
attach the protection collar .

Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.

Detaching and attaching the front panel

For details, see "Detaching the Front Panel"
(page 5).
182 mm (7 1 /
1
53 mm (2 / in)
8
Catch


Fuse replacement

When replacing the fuse, be sure
3 / to use one matching the
32
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
in)
4
Fuse (10 A)
21
GB