Remaining Risk Factors - HOLZMANN MASCHINEN BS 210TOP Mode D'emploi

 Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
slippery floor!
 Make sure the work area is lighted sufficiently!
 Work only in a well ventilated area!
 Do not overload the machine!
 Provide good stability and keep balance all times.
 Keep away from the running blade!
 Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden!
 Only one person shall operate the machine
 The machine must be operated only by trained persons (knowledge and
understanding of this manual), which have no limitations of motor skills compared
with conventional workers.
 Do not allow other people, particularly children, to touch the machine or the cable.
Keep them away from your work area!
 Make sure there is nobody present in the dangerous area. The minimum safety
distance is 2m
 Wear suitable work clothes! Do not wear loose clothing or jewelry as they might be
caught and cause severe accidents!
 Wear a hair net if you have long hair
 Loose objects can become entangled and cause serious injuries!
 Use personal safety equipment: ear protectors, safety goggles, safety shoes S1,
work wear, safety gloves (EN 388, class 3111) when working with or on the
machine!
 Never leave the machine running unattended! Before leaving the working area
switch the machine off and wait until the machine stops!
 Always disconnect the machine prior to any actions performed at the machine!
 Avoid unintentional starting
 Do not use the machine with damaged switch
 The plug of an electrical tool must strictly correspond to the socket. Do not use any
adapters together with earthed electric tools
 Each time you work with an electrically operated machine, caution is advised! There
is a risk of electric shock, fire, cutting injury;
 Protect the machine from dampness (causing a short circuit)

Use power tools and machines never in the vicinity of flammable liquids and gases
(danger of explosion)
 Check the cable regularly for damage
 Do not use the cable to carry the machine or to fix the work piece

Protect the cable from heat, oil and sharp edges
 Avoid body contact with earthed components
 Serious injuries caused by sharp edges on the hand are possible.
11.4

Remaining risk factors

Even if the machine is used as required it is still impossible to eliminate certain residual risk
factors totally. The following hazards may arise in connection with the machine´s construction
and design:
• Risk of injury to the hands / fingers by the blade during operation.
• Risk of injury due to sharp edges of the workpiece.
• Risk of injury due to contacting with live electrical components.
• Risk of injury due to breakage or being thrown out of the saw blade or portions thereof, at
overloading and incorrect direction of the saw blade..
• Risk of injury to the hearing by prolonged labor without hearing protection
• Risk of injury to the eye by flying debris, even with goggles..
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
SAFETY
24
BS 210TOP / BS 275TOP