Monitoring A Channel; Scanning - Motorola CLS Série Guide De L'utilisateur

Monitoring a Channel

Monitoring allows you to check for activity on a channel.
1. Press and hold
static and w and 0 will display.
2. Press
T

Scanning

You can scan up to 4 channels and frequencies. When the radio
detects activity, it stops scanning and locks in on the active channel. This allows you
to talk and listen to the person transmitting without changing channels.
1. To start scanning, briefly press
The scan icon h displays and the radio begins to scan the channels. When the
radio detects activity, it stops on that channel and displays w and the channel
number.
2. To talk to the person transmitting without switching channels, press Push to
Talk within 5 seconds. If no transmission occurs within 5 seconds, scanning
resumes.
3. To stop scanning, briefly press
If you press Push to Talk while the radio is scanning, the radio transmits on the
channel you were on before you started scanning.
28
. If the channel is clear to use, you will hear
T
again to stop monitoring.
.
T
.
T