Programming Call Tones and VibraCall
Your radio can transmit call tones to other radios in your group so you can alert them
that you are about to talk. Your radio is programmed at the factory with call tones
turned off (set to 0), but you can change this setting to choose a distinctive call tone.
The VibraCall
briefly when it receives if you have not transmitted or received in the last 30 seconds.
Select call tone 4 to turn VibraCall
on.
1. In programming mode, press
2. Press [ or ] to hear and select the call tone. Select call tone 4
for VibraCall
3. Press and hold Push to Talk to exit programming mode, or press
to continue programming.
S
To transmit your call tone, press B on the side of the radio.
34
®
feature is an additional call tone option that makes the radio vibrate
®
.
®
®
on. i displays on the radio when VibraCall
until E displays.
S
®
is