Programming the Interference Eliminator Code
The interference eliminator code helps minimize interference by providing code
combinations that filter out static, noise, and unwanted messages.
1. In programming mode, press
number flashes.
2. Press [ or ] to select the code (see page 44).
3. Press and hold Push to Talk to exit programming mode, or press
to continue programming.
S
Programming the Available Channels
If you need fewer channels, you can reduce the number of available channels.
1. In programming mode, press
number flashes.
2. Press [ or ] to select the number of channels you want
available.
3. Press and hold Push to Talk to exit programming mode, or press
to continue programming.
S
Note: The radio retains settings for channels made unavailable.
until y displays and the code
S
until = displays and the channel
S
33