Power Button; Top Button; Volume Control (+/-) Button; Audio Accessory Connector - Motorola DLR1020 Manuel D'utilisation

Power Button

Long press to turn the radio ON or OFF. Short
press to check battery status.

Top Button

The radio Top Button comes defaulted to
"Private Reply" feature.
Note: For more information regarding
programming the Top Button to other
features, refer to "Special Radio Call
Features" on page 49.

Volume Control (+/-) Button

Used to increase (+), decrease (-) or mute the
volume.

Audio Accessory Connector

Used to connect compatible audio accessories.

Microphone

Speak clearly into the microphone when
sending a message.

Antenna

For models DLR1020 and DLR1060 the
antennas are non-removable.
10
English

Tx/Rx Indicator LED

Used to indicate whether the radio is on
standby, receiving or transmitting.

Push-to-Talk (PTT) Button

To talk, press the PTT (Push to Talk) and WAIT
to hear the Talk Permit Tone (a quick double
beep) BEFORE you start speaking. Hold the
radio vertically 1 to 2 inches (2.5cm to 5cm)
from mouth when talking. Release the PTT to
listen.

Channel / Menu Button

In standard radio operation mode, the Channel/
Menu button comes defaulted to channel
function. To change channel, press the
Channel / Menu button and then Press the (+)
or (-) button to browse channels. Short press
the PTT button to exit.
When in Advanced Configuration Mode,
Channel / Menu button gives access and
allows navigation to set up special features.