Residual Risks; Vibrations (Hand Arm Vibrations); Safety Instructions; Personal Protective Equipment - ATIKA BF 43-2 Notice Originale

• Unauthorised modifications at the lawn trimmer will exempt
the manufacturer from any liability for damages of any kind
arising from this.
• Only persons who are familiar with the device and informed
about possible risks are allowed to prepare, operate and
service this device. Repair work may only be carried out by
us or a customer service agent authorised by us.
• The machine may not be used in a potentially explosive
environment or be exposed to rain.

Residual risks

Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety information" and
the "Intended usage" as well as the whole of the operating
instructions are observed.
Observing these instructions and taking proper care will reduce
the risk of personal injury or damage to the equipment.
• Warning! This device generates an electromagnetic field
during operation. Such a field may affect active or passive
medical implants under certain circumstances. To reduce
the risk of serious injuries we recommend persons who
carry medical implants to consult their doctor and the
manufacturer of the medical implant before operating this
device.
• Health impairment resulting from exposure to hand arm
vibration if the machine is used too long or is not properly
guided and maintained.
• Risk of injuries of fingers and hands by contact with the
rotating cutting tool.
• Risk of injury at feet by contact with the cutting tool at a no-
covered area.
• Stones and soil may be thrown off.
• Impairment of hearing when working on the machine for
longer periods of time without ear protection.
• Burning when touching hot parts.
• Carbon monoxide poisoning when using the device in
closed or poorly ventilated rooms.
• Fire danger
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist
Vibrations
(hand arm vibrations)
Vibration: ahveq = 9.661 m/s²
Measuring uncertainty K = 1.5 m/s²
Warning!
The actual vibration emission level during the use of the
machine may differ from that indicated in the operating
instructions or indicated by the manufacturer. This may be
caused by the following factors to be minded before and during
the use:
20
− Proper use of the machine
− Correct operation of the machine
− Proper condition of the machine for use
− Sharpness and correct assembly of the cutting tools
− Proper assembly of the operating handles on the machine
body
When you feel uncomfortable or notice discoloration of skin on
your hands during the use of the machine, stop working
immediately. Observe sufficient break times to rest. Failure to
have sufficient break times may result in a hand-arm vibration
syndrome.
The extent of exposure depending on the type of work or
machine use should be estimated and appropriate breaks taken.
In this way, the extent of exposure can be considerably reduced
over the entire work time. Minimise the risk caused by vibrations.
Maintain this machine according to the instructions in the
manual.
Avoid the use of this machine at temperatures under 10°C.
Create a work schedule in order to minimise vibration exposure.

Safety instructions

Observe the following advice in order to protect yourself
and other persons against possible injuries.
Before starting this device, read and keep to the following
advice. Also observe the preventive regulations of your
professional association and the safety provisions
applicable in the respective country, in order to protect
yourself and others from possible injury.
Pass the safety instructions on to all persons who work
with the machine.
Keep the instructions in a safe place for future use.
• Make yourself familiar with the equipment before using it, by
reading and understanding the operating instructions.
• Do not use the machine for unsuitable purposes (see
"Normal intended use").
• Be attentive. Be careful what you do. Behave sensibly when
working. Do not use the device when you are tired or under
the influence of drugs, alcohol or medicaments. One moment
of carelessness when using the device can result in serious
injuries.
• Children and young persons under 16 years of age as well
as persons who have not read the instruction manual are not
allowed to operate this product.

Personal protective equipment

• Never work without suited protective equipment:
− Do not wear loose-fitting clothes or jewellery; they could
be caught by movable parts.
− Wear a hair-net if your hair is long
− Certificated hardhat in situations where injuries to the
head must be expected (e.g. when chopping or releasing
trees).
− Visor
− Ear protection
− Protective jacket with striking colour