Unpacking; Assembling - Drive DeVilbiss Healthcare Samsoft 175 Guide D'utilisation

OPERATING INSTRUCTIONS OF

2) Unpacking

Check all the device elements have not been damaged
during transport. Check the accessories are present: the
lifting assembly (box with battery pack, cylinder, remote
control), the battery charger, a user guide, and possibly
a sling if it was ordered.
NB: our device is mounted and tested in our manufac-
turing site, but its packaging requires it to be folded

3) Assembling

A - Provided parts:
1 - Samsoft 175 structure with lifting assembly: box
(including battery pack), cylinder and remote control,
battery charger.
2 - Samsoft 175 user guide.
3 - Possibly one sling if it was ordered.
Samsoft 175 when assembled and folded:
CAUTION: before using the device, make sure
all the shafts, screws, and pins handled during
the installation are perfectly engaged in their
respective supports, and they are correctly locked.
Samsoft 175 is functional provided the sling compatible
with this device is used and provided the maximum
permissible load (175 Kg) is respected.
B - Structure installation
1 - Remove the structure from the box (possibly by cutting
the box angles), lay the structure on a fl at fl oor, and then
lock the brakes and wheels.
2 - In the lower part of the mast, after removing the pin,
remove the mast safety shaft.
Samsoft 175
3 - Straighten up the mast, and then position the mast
safety shaft into the second hole and reposition the pin.
Tighten the backlash screw (black wing screw).
4 - With the remote control, get the rod out of the cylinder
in order to unfold the boom. The ball joint linking the
cross-bar to the mast automatically disengages
Safety shaft
Knob
Blacklash screw
EN
Safety shaft
Pin
Safety shaft
17