Connecting The Ac Power Cord; Inserting Cds - Sony CDP-CX250 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Getting Started

Connecting the AC power cord

Connect the AC power cord to a wall outlet.
Note on placement
Be sure to place the player on a horizontal place.
If the player is slanted, it may cause malfunction or
damage the player.

Inserting CDs

You can insert up to 200 discs into this player.
POWER
1
Press POWER to turn on the player.
2
Press OPEN.
Front
cover
6
EN
Front cover
JOG
OPEN
Playing position
Rotary table
Loading position
3
Turn the JOG dial until you find the disc slot
where you want to insert a disc, while checking the
disc number (written beside every five slots and
also indicated in the display).
Disc slot at the loading position
The disc number at the loading position appears in
the display.* If the disc has the Disc Memo (see
page 17), the Disc Memo appears instead of the
disc number. As you turn the JOG dial, the disc
number or the Disc Memo changes.
ALL DISC S
CD1
DISC
*DISC-2O*
Disc number or the Disc Memo
* If you have already inserted discs, the disc number at
the playing position appears. When you turn the JOG
dial, the displayed disc number changes to the one at
the loading position.
4
Insert a disc with the label side facing right.
Notes
• Make sure you have inserted the disc into each slot at
a right angle to the rotary table. If the disc is not put
in straight, it may damage the player or the disc.
• Make sure the rotary table comes to a complete stop
before inserting or removing discs.
With the label side
facing right
Disc number
Disc number
2O

Publicité

Table des Matières
loading

Table des Matières