Specifying The Next Disc To Play; Locating A Specific Track Or A Point In A Track - Sony CDP-CX250 Mode D'emploi

Playing CDs
Notes
• When searching input characters, blanks and symbols
before the first character in the Disc Memo are ignored.
• When searching input characters, upper and lower
cases cannot be differentiated.
3
Turn the JOG dial to find the disc you want.
As you turn the JOG dial, the Disc Memos starting
with the input character appear in the display.
4
Press ENTER to select the disc.
In Program Play mode, the disc will be added to
the end of the program.
To cancel Memo Search
Press MEMO SEARCH again.
If there is no more Disc Memo starting with the input
character in Step 3
The input character changes to the next one when you
turn the JOG dial.
Specifying the Next Disc to
Play
You can specify the next disc to play while playing a
disc in Continuous or 1 DISC Shuffle Play mode.
While playing a disc, turn the JOG dial until the disc
number or Disc Memo (see page 17) you want appears
in the display.
ALL DISC S
After the current disc is played, the next disc you have
specified starts playing.
If you want to skip to the next disc right away, press
ENTER while playing the current disc.
To cancel the disc you have specified
Press CONTINUE twice.
12 EN
Next disc number
38 NEXT
CD1 DISC
NEXT DISC TRACK MIN SEC
*DISC-38*
Next disc number or
Disc Memo appears for a while.
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
using the ≠/± (AMS: Automatic Music Sensor)
buttons or number buttons on the remote. You can also
locate a specific point in a track while playing a disc.
TRACK/SPACE
Number
buttons
=/+
0/)
To locate Press
± repeatedly until you find the
the next or
track
succeeding tracks
≠ repeatedly until you find the
the current or
preceding tracks track
a specific track TRACK/SPACE, the number button
directly Z
of the track, and then ENTER. When
you locate a track with a number over
10, press the 10's digit first, then the
1's digit.
) (forward) or 0 (backward) and
a point in a track
while monitoring the hold down until you find the point
sound Z
) (forward) or 0 (backward) and
a point in a track
quickly by observing hold down until you find the point
the display Z
during pause. You will not hear the
sound during the operation.
≠/±
ENTER