Storage; Warranty Certificate - Active 3.5-Z 4T Manuel D'instructions

Follow all the maintenance instructions previously described.
- Clean the brushcutter completely and lubrificate the metallic
parts.
- Empty fuel tank and run engine until dry.Store brushcutter
in a dry place.
This machine has been designed and produced with the most advanced technology. The manufacturer guarantees
its products for 24 months from the date of purchase, with the exception of product for continuous professional
service, used for third parties witch are guaranteed for 12 months from the date of purchase.
LIMITED WARRANTY
1 ) Warranty starts on the date of purchase, the manufacturer will supply free of charge any part defective in
materials and workmanship. Warranty does not provide for the replacement of the machine.
2) Product failures will be scheduled and repaired according to the normal work flow; any possible delay cannot
lead to damages nor to an extension of the warranty period.
3) Claims under warranty will be accepted on submission to your Authorized Service Dealer of the completed
and duly stamped. Warranty Certificate together with the original purchase document stating the date of
purchase.
4) Warranty fails in case of:
- evident lack of maintenance;
- incorrect use of the machine or tampering;
- use of incorrect fuel and or lubricants;
- use of non-genuine parts;
- repairs made by unauthorized service people.
5) Parts subject to wear and tear such as cutting items, clutch or cutting safety devices filters etc., are not
covered by guarantee.
6) Shipping / transportation charges and labour incurred in replacing defective parts on warranty, shall be
born by the purchaser.
7) Claims for damages incurred during transportation have to be immediately reported to the carrier: failure to do
so will invalidate the warranty.
8) Should any failure occur during or after the warranty period, customer has not the right to interrupt payment
nor to a price discount.
9)The manufactorer is not responsible for any direct or indirect damage caused to persons or things by failures
of the machine or by a forced suspension in its use.

11. STORAGE

12. WARRANTY CERTIFICATE

MOD.
S.N. n.°
DATE:
...........................
25
- Remove the spark plug,put a small amount of oil into the
cylinder rotate the crankshaft several times using the starting
in order to distribute the oil,put the spark plug back in.
ATTENTION: all maintenance operations not reported in this
manual must be carried out by an authorized service center.
3.5 Z - 4T
DEALER:
BOUGHT BY Mr.
GB
ENGLISH