Technical Data; Troubleshooting - DS Produkte 08935 Mode D'emploi

Technical Data

Article number:
ID of operating instructions:
Device
Model number:
Voltage supply:
Power:
Handle
Power supply:
Battery
Charging time:
Operating time:
Mains adapter
Model number:
Input:
Output:
Protection class:

Troubleshooting

If the device does not work properly, fi rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the steps that are listed, contact our
customer service department.
Do not attempt to repair an electrical device yourself!
Problem
The battery is not
charging up. The
charge control
lamp (4) does not
light up when the
device is connected
to the mains power.
The device cannot
be started.
21
08935
Z 08935 M DS V1 0419
P40-FM02ES
7.4 V (2 x Li-ion battery ICR 18650,
2000 mAh)
15 W (max.)
3 V (2 x 1.5 V batteries, AAA type)
approx. 2 – 4 hours
approx. 40 minutes (with fully charged battery)
XS-0901000VEUD
100 – 240 V ~ 50 / 60 Hz
9 V DC, 1000 mA
II
Possible cause
The mains adapter is not
inserted correctly in the plug
socket.
The barrel connector is not
plugged in the charging sock-
et (14) of the device correctly.
The plug socket is defective.
There is no mains voltage.
The battery of the device is
too weak.
The On / Off switch (5) is in
position O.
The batteries in the handle (1)
are too weak.
0.3 A
,
Fix
Correct the fi t of the mains
adapter.
Correct the connection
between the charging socket
and barrel connector.
Try another plug socket.
Check the fuse of the mains
connection.
Charge up the battery.
Move the On / Off switch to
position I.
Replace the batteries (see
the "Inserting / Changing Bat-
teries in the Handle" chapter).
EN