SCHOLTES BCG 199D P 0 Mode D'emploi page 41

Programming delayed automatic cleaning
1. Press the selector button ; the END COOKING option will appear on
the display.
2. Adjust the value using the buttons.
3. Press the "OK" button to confirm.
4. Press the "START/STOP" button to activate the programmed process.
5. When the cooking time has elapsed, a buzzer sounds and the oven
switches off.
• For example: it is 9:00 a.m. and the Economy PYROLYTIC cycle has been
selected: default set time 1 hour. 12:30 is scheduled as the end time. The
programme will start automatically at 11:30 a.m.
The message WAITING shows that a programme has been scheduled. The
display shows the pyrolytic cycle end time and duration alternately.
To cancel programming, switch the oven off
Once the automatic cleaning cycle is over
You will have to wait until the temperature inside the oven has cooled down
sufficiently before you can open the oven door. You will notice some white
dust deposits on the bottom and the sides of your oven; remove these
deposits with a damp sponge once the oven has cooled down completely.
Alternatively, you can make use of the already heated oven, in which case it
is not necessary to remove the deposits, they are completely harmless and
will not affect your food in any way.
Do not place
GB
or rest anything
on the open door
.
NOTICE
Make sure that the racks
and dripping pans have been
inserted fully before closing the door
Please read the manual
carefully for information
regarding the automatic
cleaning (pyrolytic) cycle
41
GB