Device Description; Initial Use - Beurer EM 49 Mode D'emploi

3. Device description

Buttons:
1 ON/OFF button
2 ENTER button
3 Setting buttons
˄/˅ ˄/˅
( left,
4 MENU button
5 Keylock
Display (full screen):
1 Menu /
2 Program number
3 Impulse intensity channel 2 (
4 Electrode positioning indicator
5 Impulse intensity channel 1 (
6 Low battery
7 Keylock
8 Display for frequency (Hz) and pulse
width (µs)
9 Timer function (remaining time
display) or working time
5
right)
4
3
2
1
/
)
9
8
)
7
6
5
4

4. Initial use

1. Remove the belt clip from the unit (if attached).
2. Press the battery compartment cover on the rear
of the device and slide it downwards.
3. Insert the three alkaline AAA 1.5 V batteries. Make
sure that the batteries are inserted the correct
way round.
4. Close the battery compartment lid again carefully
3
(Fig. 1).
5. Reattach the belt clip, if required.
6. Connect the connection cables with the
electrodes (Fig. 2).
The electrodes feature clip closures to make
connection particularly easy.
7. Guide the connection cable plugs into the socket
on the top of the device (Fig. 3).
8. Do not pull, twist or make sharp bends in the
cables (Fig. 4).
Please note that when the battery is replaced
or removed, all settings are restored to the
1
factory default settings.
2
3
25
Fig. 1
Fig. 2
Fig. 3
Fig. 4