Digital Instrument, Warning Lights - SWM Superdual E4 2017 Guide Rapide

Depth spot light switch
- To turn on the spot lights (6), press button (7) on
the switch.
- To turn off the spot lights (6), press button (8) on
the switch.
7

DIGITAL INSTRUMENT, WARNING LIGHTS

The motorcycle is equipped with a digital instru-
ment with 5 indicator lights: high-beam headlight,
engine malfunction, direction indicators, neutral,
and ABS.
1) High-beam light (BLUE).
Turns on when the low-beam headlights are acti-
vated.
2) Engine malfunction indicator light
Turns on when the engine is not functioning prop-
erly; in this case, it is recommended to visit an
SWM service centre as soon as possible.
The indicator light turns off once the malfunction
has been resolved.
6
3) Turning indicator light
Starts flashing when the right or left direction in-
dicator is activated.
4) Neutral warning light
Turns on when the gear shift lever is in the neutral
position.
8
5) ABS warning light
Starts flashing when the rear wheel's ABS func-
tion is deactivated.
Remains on if an ABS system malfunction is de-
tected; in this case, it is recommended to visit an
SWM service centre as soon as possible.
The indicator light turns off once the malfunction
has been resolved.
NOTE:
- The display check will be carried out for the first
few seconds after turning the key; once the check
phase has been completed, the instrument will
display the last function set.
- When the engine is turned off, the instrument
does not show any functions.
(ORANGE).
(GREEN).
(GREEN).
(ORANGE).
ABS
1
2
4
5
- To select instrument functions and reset func-
tions, use the SCROLL button (A)
- The functions, which can be selected in order are
as follows:
1- SPEED / ODO / FUEL
2- SPEED / H / FUEL
3- SPEED / CLOCK / FUEL
4- SPEED / TRIP 1 / FUEL
5- SPEED / STP 1 / FUEL
6- SPEED / AVS 1 / FUEL
7- SPEED / SPEED MAX / FUEL
8- SPEED / TRIP 2 / FUEL
9- SPEED / TRP 2 / CLOCK / FUEL
10- SPEED / RPM (engine r.p.m. numerical value) /
FUEL
.................
3
A
EN - 11