ChefLine PYRALIS Notice D'utilisation page 67

4 MECHANICAL OVEN START UP AND USE
COMMAND PANEL DESCRIPTION
(F)
(G)
(A)
The command pannel consists of:

Main switch (A)

Cooking chamber light switch (B)

Digital control thermometer (C)

Thermostat for the regulation of top temperatures (D)

Thermostat for the regulation of bottom temperatures (E)

Top heatin elements function pilot light (F)

Bottom heatin elements function pilot light (G)
FIRST LIGHTING OF THE OVEN
At the first use of the appliance it is advisable to heat the empty oven to eliminate bad smells caused by the
refractory stones evaporation and the inner metallic parts.
Procedure:
- fully open the exhauster valve
- set the main switch in the position "1" after checking that the oven is connected with the power supply
- leave the oven working (empty) for at least 8 hours at the temperature of 300° before proceeding to the
first baking
START UP PHASE
After connecting the oven to the electric net rotate the main switch (A) in position "1". The digital
thermometer display shows the actual average temperature of the baking chamber. Rotate the thermostat
knobs (D) and (E) until the expected temperature. In this way top and bottom heating elements are under
working and the relevant light signals switch on.
- 67 -
(D)
(C)
(E)
(B)