Repairs; Environmental Notes; Troubleshooting; Rivet Nut Is Not Threading On - Gesipa GBM 95 Mode D'emploi

8.

Repairs

Repairs under warranty are carried out by the manufacturer. Repairs outside the warranty pe-
riod should only be carried out by skilled technical personnel. Failure to observe the assembly
and setting procedures and operation by non-skilled personnel may result in serious damage
to the blind rivet setting tool. In case of doubt, always send the blind rivet setting tool back to
the supplier or to GESIPA
9.

Environmental notes

Used hydraulic oil must be disposed of in accordance with recycling regulations.

10. Troubleshooting

10.1 Rivet nut is not threading on

Cause
Faulty rivet nut thread
Faulty mandrel thread

10.2 Set rivet nut is loose

Cause
Setting stroke „Y" too short

10.3 Threaded mandrel is not unthreading

Cause
Setting stroke „Y" too long
Threading-on time too short
.
®
Solution
Use new rivet nut
Exchange threaded mandrel (see para-
graph 6.4)
Hold rivet nut tightly when threading out
Solution
Adjust to larger stroke (see paragraph 6.2)
Solution
Reduce stroke (see paragraph 6.2)
If necessary, unscrew with hexagon screw
driver (see drawing 4)
Increase threading-on period (see para-
graph 6.5)
GB
21