Adjustment Of Stroke "Y - Gesipa GBM 95 Mode D'emploi

GB
6.2

Adjustment of stroke "Y"

The stroke «Y» (see chart) depends on the blind rivet nut size (M3 to M10, 6-32 to 3/8-16)
and the material thickness «Z» (drawing 2).
Stroke chart for GBM 95:
Thread size
M3
M4
M5
M6
M8
M10
• Loosen lock nut (3) (drawing 1).
• Adjust stroke «Y» by turning in or out the nosepiece (1).
• Stroke «Y» has to be adjusted to «min», to be locked (tightened) and then the rivet nut
has to be set.
• If the blind rivet nut does not form a proper sealing head (as shown in drawing 2) the stro-
ke «Y» must be increased step by step. Afters stroke adjustment, the lock nut (3) has to
be tightened.
Drawing 2
18
Stroke min.
0.5
1
1.5
2.5
3.5
3.5
"Y" mm max.
-
-
- 2.5
- 3.5
- 4.5
- 4.5
1
2