REBER ART.: 9600 N – 96xx Nxy - 8710 N - 8820 N - 8410 N - 8910 N - 8310 N ART.: 9601 N - 90xx Nxy – 95xx Nxy ART.: 9602 N – 92xx Nxy Notice D'utilisation Et Entretien page 42

direction to the end of stroke to enable machine start-up; switch on the machine by
pressing the motor start-up switch (position - I - );
cover (7) without stopping the machine;
then switch off the machine, turn in an anti-clockwise direction and remove the
cover (7) and remove the mix obtained. If the recommended doses were followed,
the mix must easily detach from the mixer arm (9) and the bowl (8) must be clean
down to small pieces and used for extrusion with the pasta press adaptable to the
mixer gearmotor.
and remove it from the bowl (8), turning the bowl (8) anti-clockwise to remove it
from the support (10), carefully wash and dry all the parts that came in contact with
the mix.
You are advised not to turn the cover (7) to end of stroke when repositioning the
DOSAGE AND TYPES OF MIX
of pasta is composed of:
-
local traditions (the mix with eggs alone tends to be very compact and suitable for
-
on taste and local traditions.
-
-
-
WARNINGS