Commissioning; Preparation - Festo DGC Série Notice D'utilisation

DGC−...
8

Commissioning

Commissioning the complete system
Slowly pressurize the complete system.
S
In this way you will prevent sudden un
controlled movements.
For slow start−up pressurization, use
safety start−up valve type HEL−... /
type HEM−... .
Preparing for commissioning
With work loads or at high and medium slide speeds:
Use the Configuration Tool for pneumatic drives:
S
www.festo.com/engineering
Use cushioning elements of sufficient size.
S
Without external cushioning devices the
DGC−... will withstand maximum speeds
and work loads as per Fig. 24 and Fig. 25.
DGC−8/12−G/KF−P
DGC−12−P−G
DGC−8−P−G
Fig. 24
38
DGC−12−P−KF
DGC−8−P−KF
QH−...
Fig. 23
DGC−18...40−G/GF/KF−PPV
HEL−...
dia. 40
dia. 32
dia. 25
dia. 18
dia. 12
dia. 8
Festo DGC−... 0604b English