Configuring The Unit For The First Time - Ingeteam INGECON SUN STORAGE 1Play TL M Manuel D'installation

Ingeteam

17.2.1. Configuring the unit for the first time

INFO
For more information on starting up the inverter, visit the website
https://www.ingeconsuntraining.info/?page_id=25439
To manage the inverter from a smartphone or tablet, you need to install the INGECON SUN Monitor app,
available on Apple Store and Play Store.
https://apps.apple.com/br/app/ingecon-sun-monitor/
id1434881715
Thanks to the web user interface, the inverter can be configured in a simple and agile way, both in stand-alone
installations and those connected to grid, through a computer or smartphone.
By default the inverter acts as a Wi-Fi access point, generating a SoftAP network with an SSID similar to
Ingeteam_1GMxxxxxxAxx_MMMM. By default this network is not password-protected.
Follow the instructions below to establish a local connection with the inverter and configure it:
Connecting with a smartphone or tablet
1. Install the INGECON SUN Monitor app.
2. Log in as an authorized installer and press the
3. Follow the steps given to access the unit's web application.
Connecting with a computer
1. Connect to the Wi-Fi network generated by the inverter.
2. In the web browser, access the web application at http://169.254.1.1. You must log in as an authorized
installer.
When connecting for the first time, a wizard will guide you through the steps for an optimal configuration.
44
https://play.google.com/store/apps/details?id=com.
ingeteam.ingecon.sunmonitor
icon to connect to the inverter locally.
ABH2014IQM01_A- Installation and Operation Manual
Commissioning