Operating Your A/V Components With The Remote Commander; Selecting The Desired A/V Component - Sony RM-VL1400T Mode D'emploi

4
Press the PROGRAM + or
PROGRAM – button, then
press the 1 (power) button
repeatedly until the A/V
component reacts as follows:
TV: Powers off.
Amplifier: Powers off or the volume
turns up.
CD player, MD deck, Casssette
deck: Powers off or starts playing.
Other component: Powers on
5
Press the OK button or centre
Label select button.
A beep sounds, and the four-digit
preset code you have set and "OK"
appear on the screen, then the display
returns to the screen shown in step 2.
6
To set other A/V components,
repeat steps 3-5.
7
Press the
RETURN button twice.
The set mode closes, and the Remote
Commander returns to standby for
operating the A/V components.
(light) button or the
Operating your A/V
components with the
Remote Commander
Select the desired A/V component by
pressing the COMPONENT select button
on the Remote Commander, then operate
the A/V component.
Selecting the desired A/V
component
Press the COMPONENT select button to
select the desired A/V component.
If you press the OTHER button, selectable
A/V components appear on the screen.
Select the desired A/V component by
pressing the corresponding Label select
button. The A/V components displayed on
the screen change by pressing the OTHER
button repeatedly.
Continued
GB
9