Resetting The Settings; Resetting A Component Select Button Or Label Select Button - Sony RM-VL1400T Mode D'emploi

Resetting the
settings
Resetting a COMPONENT
select button or Label
select button
You can reset the A/V component settings
to the factory preset.
1
While pressing the
button, press the OTHER
button.
"SET MODE" appears as the screen
title.
2
Press the V/v buttons to
select "7 RESET", then press
the OK button or the centre
Label select button.
"RESET" appears as the screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
3
Press the V/v buttons to select
"1 COMPONENT", then
press the OK button or the
centre Label select button.
"COMPONENT" appears in the
second line on the screen.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
4
Press the COMPONENT
select button or Label select
button you want to reset.
A beep sounds and all the settings on
the selected component are reset to
the factory settings.
GB
28
5
(light)
Press the (light) button or
the RETURN button three
times.
Setting is complete and the Remote
Commander returns to the status
before you started setting.