Setting The Beep - Sony RM-VL1400T Mode D'emploi

Setting the beep

The Remote Commander is preset at the
factory with the confirmation beep set to
on. You can change the setting to turn off
the beep.
1
While pressing the
button, press the OTHER
button.
"SET MODE" appears as the screen
title.
2
Press the V/v buttons to
select "5 UNIT SETTINGS",
then press the OK button or
the centre Label select button.
"UNIT SETTINGS" appears as the
screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
3
Press the V/v buttons to select
"7 BEEP SOUND", then press
the OK button or the centre
Label select button.
"BEEP SOUND" appears as the
screen title, and the current setting is
shown inside the [ ].
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
4
(light)
5
Note
When making settings, a beep sounds even if
the button beep is set to off.
Press the B/b buttons or the
left or right Label select
button.
Each time the setting changes, a beep
sounds and [ ] moves to the new
setting.
ON: Turns on the beep.
OFF: Turns off the beep.
Press the (light) button or
the RETURN button three
times.
The set mode closes, and the Remote
Commander returns to standby for
operating the A/V components.
GB
27