EUROM CWC9000B Manuel D'utilisation page 19

1 = front panel 2 = filter

In order to avoid the creation of odours and ensure the unit works properly, it must be
cleaned internally once every two weeks.

Remove the front panel by loosening the two attachment pins and lifting the panel
upwards, off the 2 upper attachment points. Remove the filter and the honeycomb filter
from the unit.

Wash the filter in warm water with a mild, soapy solution; use a soft brush if necessary.
Rinse with clean water and leave to dry.

Wash the honeycomb filter with clean water and a soft brush if necessary. Leave to dry.

Empty the water tank and clean with water, a mild soapy solution and a soft brush if
necessary. Rinse with clean water and leave to dry.

At the end of the season, store the cleaned and dried heater in the original packaging if
possible. Store it upright in a cool, dry and dust-free place.
Problems and solutions
The device does not work

No electricity. Check to ensure the plug is in the socket and that the socket is live.

Is the ON/OFF button pressed in?

An internal electrical component is broken. Consult your supplier or an electrician.
The unit will not switch off

Is the ON/OFF button pressed in?

An internal electrical component is broken; consult your supplier or an electrician.
Peculiar sounds

Something is not positioned correctly inside the machine. Remove the filters and the
water reservoir and install correctly.

A swivel wheel is broken/missing; consult your supplier.

There is an internal problem; consult your supplier.
3 = honeycomb-filter
19