Télécharger Imprimer la page

EUROM CWC9000B Manuel D'utilisation page 17

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
The Air Cooler has the following functions:
Cooling: cools air by evaporating water, even in a damp or windy space.
Air humidification: the evaporated water humidifies air in the room.
Air cleansing: a functioning unit filters fine particulates, fibres etc and also air pollution and
nicotine from the air and thus helps create a clean and healthy environment.
Ionisation: removing ions from the air makes it extra clean and also increases the oxygen
level; this is beneficial for heart and lung functions, resistance to disease, sleep and so on.
Swivelling: the cooled air can be emitted horizontally over a 120° angle. The vertical direction
can be set manually.
Fan: the fan can be set at a range of ventilation types and speeds.
Remote control: the unit can be operated using the remote control from 6 metres away and
within an angle of 120°.
The device is energy efficient and only uses water for cooling purposes: it uses no chemical
agents and is therefore environmentally-friendly. The unit is easy to clean.
Wheel assembly
You do not need to assemble the wheels: the unit is most stable when placed on the
base plate, without wheels. If you would nevertheless like to attach the wheels,
please do so as follows:
Place the unit with its back on a soft, level surface.
Remove the four rubber stoppers from the holes in the base plate
Push 2 swivel wheels into the front holes (1) using the pins and make sure they are
secure.
Push 2 swivel wheels into the back holes (2) using the pins and make sure they are
secure.
Put the unit in an upright position, on the wheels.
Installation and Preparation
Place the unit straight, on a sturdy, flat and horizontal surface. Ensure there is sufficient
space at the front (air outlet) and sides (air inlet). The back of the unit may rest against a
wall, if necessary.
Check whether the socket that you wish to use provides the required voltage, as detailed
on the specification plate.
Pull the water reservoir roughly 10 cm backwards and fill with clean water; do not exceed
the 'MAX' level!
If you have not used the unit for some time, refresh any remaining water.
If you wish to use the humidification function, ensure there is sufficient water in the
reservoir.
Optionally mounting the swivel wheels
affects the stability of the air cooler!
17

Publicité

loading