Changing The Speed Of Songs; Changing The Pitch Of Songs - Boss eBand JS-10 Mode D'emploi

4.
Select a patch .
MEMO
In the default factory settings, appropriate effect patches are
assigned for each song on the supplied SD card . For details,
refer to "Changing the Patch When the Song is Switched (PATCH
SYNC)" (p . 22) .

Changing the Speed of Songs

You can change the playback speed of songs .
This feature lets you slow down the song tempo to practice difficult
or fast passages . Changing the song's speed will not have an effect
on the pitch .
1.
Press the [SPEED] button .
2.
Select SPEED .
3.
Press the [ENTER] button .
Turn SPEED to "ON" to change the speed .
4.
Set the playback speed .
You can set the speed in the range of 50 to 150 (%) . Normally, the
speed is set to 100 .
MEMO
When the speed is changed, the "S" icon that indicates the speed
change appears on the top screen .
Play the Guitar with Songs as Your Backing

Changing the Pitch of Songs

You can change just the pitch without changing the playback speed
of songs .
1.
Press the [SPEED] button .
2.
Select PITCH or FINE .
3.
Press the [ENTER] button .
PITCH FINE is turned "ON . " Pitch of the song can now be changed .
4.
Apply the settings for PITCH or FINE .
The pitch is changed .
You can change the PITCH setting in the range from -6 through +7
(in semitone steps) .
You can change the FINE setting in the range from -50 through +50
(in fine steps of 1 cent) .
MEMO
• When the pitch is changed, the "P" icon that indicates the pitch
change appears on the top screen .
• If a KEY is set in the song parameters (p . 21), the KEY indicator
works according to the PITCH settings .
KEY indicator
11