Recording Performances; Switching Effects - Boss eBand JS-10 Mode D'emploi

Play the Guitar with Songs as Your Backing

Recording Performances

You can record the sounds exactly as you hear them from the JS-10 .
1.
To record while the song is being played back,
first press the [ ] (PLAY) button, and then press
the [ ] (REC) button .
The song will be played back and recorded along with
the sounds input to INPUT 1 jack and INPUT 2 jack .
MEMO
In order to record only the sounds input to INPUT 1 jack and
INPUT 2 jack, just press the [ ] (REC) button without pressing
the [ ] (PLAY) button (i .e ., do not play back the song) .
2.
Press the [ ] (STOP) button to stop recording .
The REC END popup appears .
3.
Decide what to do with the recording .
Icon
SAVE
ERASE
PREVIEW
(Press the [ ] (PLAY) button)
MEMO
Recorded data (songs) are automatically assigned the name
"SONG****: (original song name)" (with **** indicating the
number) . However, if the original song name was edited with
eBand Song List Editor, then it will be "SONG**** . "
10
Explanation
The recording is saved in "USER" category in
the song list .
The recording is discarded . (The recorded
content will not be saved .)
Listen to the recording .

Switching Effects

The internal effects can be switched .
1.
Select either IN1 or IN2 .
IN1
Effect on INPUT 1 (GUITAR/
MIC) jack
MEMO
The effect will not be applied on AUX jack .
2.
Press the [EFFECTS] button .
The PATCH SELECT screen appears .
3.
Select a category .
Usage Category
For Guitar
For Bass
For
Microphone
For User
Patch
* When you connect a microphone, select an effect from the
categories for microphones (p . 10) . Also, switch the input
sensitivity of the INPUT jack to mic (p . 23) .
IN2
Effect on INPUT 2 (GUITAR/
MIC) jack