Removing The Center Sound (Center Cancel); Repeating Playback Of A Specified Segment (Ab Repeat); Precise Adjustment Of The Ab Repeat Segment - Boss eBand JS-10 Mode D'emploi

Play the Guitar with Songs as Your Backing
Removing the Center Sound (Center
Cancel)
Songs can be played back with the center sound removed .
1.
Press the [SPEED] button .
2.
Select CENTER CANCEL .
3.
Press the [ENTER] button .
Turn CENTER CANCEL to "ON . "
4.
Set the location of the sound you want to remove .
"C0" removes the center sound, while "L**" remove the left sound
and "R**" removes the right sound .
MEMO
• Center Cancel applies also to input sounds from the INPUT 2
(AUX) jack and USB COMPUTER port .
• Some sounds cannot be removed completely .
• When Center Cancel is turned on, the "C" icon indicating that it is
on appears on the top screen .
12
Repeating Playback of a Specified
Segment (AB REPEAT)
Use this feature for guitar solo practice and in other situations
where you want to practice along with a single section as it plays
back repeatedly .
1.
Press the [ ] (PLAY) button .
2.
Press the [A B] button at the start point and
also at the end point of the repeat segment .
Playback of AB REPEAT
segment will be repeated .
To turn AB REPEAT off, press the [A
Precise Adjustment of the AB REPEAT
Segment
You can precisely adjust the start and end points of the segments to
be repeated .
1.
Follow this sequence of steps: [MENU] button 
"AB EDIT"  [ENTER] button .
2.
On the AB EDIT screen, adjust the start point (A) and the
end point (B) .
MEMO
• You can press [ENTER] on the AB EDIT screen to alternately
switch the AB REPEAT function on and off .
• With MP3 data, you may be unable to play back from a specific
time (the performance starts near the specified time) .
• The interval between A and B cannot be less than one second .
B] button again .