Residual Risks - STERWINS 20 VGT2-28.1 Notice De Montage, Utilisation Et Entretien

• Never use the product standing on steps or a ladder. Do not work over should height.
• Always ensure the safety guard supplied is fitted before using the product. Never
attempt to use an incomplete product or one fitted with an unauthorised modification.
• Check the trimming spool regularly for damage, and if damaged repair immediately.
• Switch the product off when the trimming spool is blocked. Remove the battery pack
and remove the blockage. Inspect the spool for damage before using the product again.
2.10 SERVICE
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
• Have the product checked by a qualified professional and repaired, if necessary, before
you operate it again.

2.11 RESIDUAL RISKS

• Familiarise yourself with the use of this product by means of this instruction manual.
Memorise the safety directions and follow them to the letter. This will help to prevent
risks and hazards. Always be alert when using this product, so that you can recognise and
handle risks early. Fast intervention can prevent serious injury and damage to property.
Switch off and disconnect from the battery if there are malfunctions.
• Even if all instructions are strictly followed, there are still some factors that could lead to
hazards, such as :
- Thrown out pieces of the work piece.
- Vibration injuries : use designated handles and try to reduce working time and
exposure.
- Injuries caused by noise : wear ear protection and reduce working time and exposure.
- Inhalation of dust and particles.
- Wear eye protection at all times.
If you experience any of these factors while using the machine, stop the machine consult
your doctor immediately
• Injuries may be caused or aggravated by prolonged use of a tool. When using any tool
for prolonged periods, ensure you take regular breaks.
• Prolonged use of the product exposes the user to vibrations that can cause a range of
conditions collectively known as hand-arm vibration syndrome (HAVS) e.g. fingers going
white; as well as specific diseases such as carpal tunnel syndrome.
• To reduce this risk when using the product, always wear protective gloves and keep your
hands warm.
283
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN