Residual Risks - STERWINS 25EGT1-300.1 Notice De Montage, Utilisation Et Entretien

FR 2.9 SERVICE
• Have your power tool serviced by a qualified repair person using only identical
EN
replacement parts. This will ensure that the safety of the power tool is maintained. Do not
use metal blade.
• Have the product checked by a qualified professional and repaired, if necessary, before
you operate it again.
• If the supply cable is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.

2.10 RESIDUAL RISKS

• Familiarize yourself with the use of this product by means of this instruction manual.
Memorize the safety directions and follow them to the letter. This will help to prevent
risks and hazards. Always be alert when using this product, so that you can recognize and
handle risks early. Fast intervention can prevent serious injury and damage to property.
Switch off if there are malfunctions.
• Even if all instructions are strictly followed, there are still some factors that could lead to
hazards, such as :
- Thrown out pieces of the work piece.
- Vibration injuries : use designated handles and try to reduce working time and
exposure.
- Injuries caused by noise : wear ear protection and reduce working time and exposure.
- Inhalation of dust and particles.
- Wear eye protection at all times.
If you experience any of these factors while using the machine, stop the machine consult
your doctor immediately
• Injuries may be caused or aggravated by prolonged use of a tool. When using any tool
for prolonged periods, ensure you take regular breaks.
• Prolonged use of the product exposes the user to vibrations that can cause a range of
conditions collectively known as hand-arm vibration syndrome (HAVS) e.g. fingers going
white; as well as specific diseases such as carpal tunnel syndrome.
• To reduce this risk when using the product, always wear protective gloves and keep your
hands warm.
28