Ingeteam INGECON SUN STORAGE 1Play Série Manuel D'installation page 93

Display control
Monit. Battery
Parameter
VBAT Storage system voltage (V).
IBAT Storage system current (A). Positive for discharge, negative for charge.
SOC Estimation of the storage system charge status (%).
STATUS Status of the storage system. The following states may be shown: Stop, Discharge, Charge,
Absorption, Flotation or Equalization.
TEMPBAT Storage system temperature (ºC).
Bat. Manager Monit.
Parameter
VBAT Storage system voltage (V).
IBAT Storage system current (A). Negative for discharge, positive for charge.
SOC Estimation of the storage system charge status (%).
I MAx CH Maximum charge current permitted by the storage system manager.
I MAx DCH Maximum discharge current permitted by the storage system manager.
Photovoltaic Monit.
Parameter
VDC Photovoltaic input voltage (V).
IDC Photovoltaic input current (A).
Inverter Monit.
Parameter
VAC Voltage generated by the inverter (V).
IAC Current through the inverter (A).
FAC Frequency generated by the inverter (Hz).
SAC Apparent power (VA) through the inverter.
COSPHI Cosine of Phi. Cosine of the phase shift angle between the voltage and current supplied by
the inverter. The cosine of phi can be positive or negative:
•
respect to the voltage.
•
respect to the voltage.
Grid Monit.
Parameter
VAC Auxiliary grid/genset voltage (V).
IAC Auxiliary grid/genset current (A).
FAC Auxiliary grid/genset frequency (Hz).
SAC Auxiliary grid/genset apparent power (VA).
STATUS Indicates whether the inverter is connected to or disconnected from the auxiliary grid/
genset.
Digital I/O Monit.
Parameter
OUTPUT 1 Indicates the configuration of the digital output 1.
ABH2013IQM01_A - Installation and Operation Manual
Positive: the inverter injects positive reactive energy. The current is ahead with
Negative: the inverter injects negative reactive energy. The current is delayed with
Explanation
Explanation
Explanation
Explanation
Explanation
Explanation
Ingeteam
DE
EN
ES
FR
IT
PT
93